background image

YAMF1

Installation Instructions

2

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively "Milestone"), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies.
All rights reserved.

 IMPORTANT WARNINGS AND

CAUTIONS!

WARNING:

A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION:

A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the
corresponding instructions.

WARNING:

Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty!  It is the
installer’s responsibility to make sure all components are
properly assembled and installed using the instructions
provided.

WARNING:

Exceeding the weight capacity can result in

serious personal injury or damage to equipment!  It is the
installer’s responsibility to make sure the combined weight of
all components attached to the YAMF1 does not exceed 25 lbs
(11.3 kg). Use with products heavier than the maximum weight
indicated may result in instability or collapse of the mount
causing possible injury.

DIMENSIONS

11.50
292.1

8.17

207.6

18.15

MAX REACH

461

6.50

165.1

16.34
415.1

15.17

MAX HEIGHT

385.4

14.31

363.4

A

2.95

75

3.94

100

2.95

75

3.94

100

DETAIL A

SCALE 1 : 3

DIMENSIONS:        INCHES
                          [MILLIMETERS]

Summary of Contents for YAMF1









Reviews: