XFA1U
Installation Instructions
10
WARNING:
Display may be very heavy! Ensure display
may be safely lifted and maneuvered as required to install on
mount. Failure to take adequate precautions can result in
serious personal injury or damage to equipment!
7.
Position latches on interface uprights so that they are in the
“open” position. (See Figure 9)
8.
Hang interface uprights (B) on head assembly. (See
Figure 9)
IMPORTANT ! :
To ensure a stable mount, make sure
stability knobs are tightened prior to installing display.
Figure 9
IMPORTANT ! :
In order to ensure an even mount, install
uprights to be centered over column assembly. Do NOT
install both uprights to the same side of column
assembly!
(See Figure 10)
Figure 10
9.
Move latches on interface uprights to the “closed” position
to secure display to head assembly. (See Figure 11)
Figure 11
10. Snap four upright covers (A) onto uprights. (See Figure 12)
NOTE:
Tabs on inside of covers (A) will snap directly into holes
on uprights to ensure a secure connection.
Figure 12
11. (Optional) Use padlocks (not provided) to secure uprights to
head assembly. (See Figure 12)
open position
7
7
8
8
head assembly
stability knobs x 2
side
view
9
9
9
9
(column not shown for clarity)
(A) x 4
10
11
(B) x 2
(column not shown for clarity)
