Installation Instructions
TS525TU
9
15. Loosely install two 5/16 x 2 1/2" flange head lag screws (F)
through lower wall rail on main assembly and into concrete
anchors. (See Figure 10)
16. Place two installation spacers (H) over two flange head lag
screws (F). (See Figure 10)
17. Tighten two screws (F) to secure main assembly (M) to wall.
(See Figure 10)
Figure 10
WARNING:
DO NOT REMOVE SPACER AS SHOWN
BELOW PRIOR TO INSTALLING THE LOWER TWO LAG
SCREWS OR THE MOUNT WILL FALL OFF THE WALL
WHEN THE SPACER IS REMOVED!
18. Loosen two flat head cap screws on upper carriage rail in
order to loosen white spacer. (See Figure 11)
19. Remove white spacer from mount. (See Figure 11)
20. Tighten flat head cap screws. (See Figure 11)
Figure 11
(F) x 2
(H) x 2
15
17
16
18
20
19
(N)
(M)
