Installation Instructions
TPA-111
2
Installation for 75mm and 100mm Mounting:
1. Securely anchor the back plate to framework using
Chief TPK accessory clamps or equivalent rated
for the required load (see Figure 2).
2. Install the pitch-adjustable plate on the back plate
and secure using four 5/16-18 X ½” hex head cap
screws (see Figure 3).
3. For displays with a flat mounting surface (see
Figure 6), place adapter bracket over four
mounting holes and secure using four M4 X 10
PHCS screws, as follows:
•
For 75mm, see Figure 4 and Figure 5.
•
For 100mm, see Figure 4 and Figure 7.
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
5/16-18 X ½” hex head cap screws
Pitch-Adjustable
Plate Assembly
Back Plate
Back Plate
VESA Flat Panel
Interface Adapter