Service Manual
SL151-SK1 / SL151-SK5
5
8.
Restore power to SL151.
9.
Verify that SL151 is operating properly when moving up and
down.
10. Remove power from SL151.
11. Add cable tie to hold motor wiring in place. (See Figure 4)
12. Replace motor connector cover and reinstall two Phillips
screws (removed in Step 7 of
Removing Motor
section), or
two Phillips 8-32 x 5/16" screws (C). (See Figure 4)
13. Reinstall the projector into the SL151 following instructions
included with the SL151.
14. Reinstall ceiling pan following instructions included with the
SL151.
15. Restore power to SL151.
