Installation Instructions
Model MSP-SPWH (PWH™)
7
The PSB-2095 parts list is shown in the table on this
page.
1.
Using a 10-24 button head cap screw inserted from
the backside of the bracket (see figure 5), secure the
mounting button with the chamfered hole of mounting
button (larger surface) facing the bracket
(see figure 6).
2.
Repeat Step 1 to install the other three mounting
buttons.
3.
Place nylon spacers over the mounting holes on the
back of the screen (see figure 7).
4.
Attach mounting bracket to the display (see figure 8),
as follows:
a. For 32” screens, use the M5 screws.
b. For 42” screens, use the M6 screws.
Figure 5: Mounting Button Attachment
Figure 6: Mounting Button Location
Figure 7: Bracket Hole Location
Figure 8: Bracket Attachment Location
REF
DESCRIPTION
QTY
10
Plasma Bracket
1
20
10-24 x 1/2 Button Head Cap Screw
4
30
M5 x 20mm Button Head Cap Screw
4
40
M6 x 20mm Button Head Cap Screw
4
50
Mounting Buttons – Tapped
4
60
1/8” Allen Key
1
70
.875 OD x .33 ID x .375 Nylon Spacer
4
80
M4 Allen Key
1
10-24 Button Head
Cap Screw
Mounting
Button
Nylon Spacer
6 mm
Nylon Spacer
5 mm
32" Display
42" Display
32" Display
42" Display
