Model MSP-SPWH (PWH™)
Installation Instructions
10
ADJUSTMENTS
TENSION ADJUSTMENTS
Vertical Tilt Tension Adjustment
1.
Using 5/32” Allen wrench, slightly tighten or loosen
two screws, one on each side, equally (see figure 12).
2.
With display mounted, check for desired vertical tilt
tension.
3.
Repeat Step 1 and Step 2 until desired vertical tilt
tension is obtained.
Lateral Tilt Tension Adjustment
CAUTION:
Overtightening lateral adjustment will
cause excessive wear and may distort adjustment
components.
1.
Using a 9/16” wrench, slightly tighten or loosen lateral
tilt tension adjustment nut (see figure 13).
2.
Mount the display and check for desired tilt tension.
3.
Repeat Steps 1 and 2 until desired tilt tension is
obtained.
Rotational Tilt Tension Adjustment
1.
If necessary, loosen or tighten bottom rotational tilt
tension adjustment nut (see figure 14).
2.
Mount the display and check for desired rotational tilt
tension.
3.
Repeat Steps 1 and 2 until desired rotational tilt
tension is obtained.
Figure 12: Vertical Tilt
Figure 13: Lateral Tilt
Figure 14: Rotational Adjustment
Adjustment
Nut
Vertical Tilt
Adj. Screw
Adjustment Nut
Lateral Tilt
Rotational
Adjustment Nut
