Figure 9
Figure 10
Figure 11
5. Install PSM-2042 brackets using regular and lock washers as well as 5/16-18 nuts, making sure to not
over tighten the nuts since you will want to slide the screens together to form the 84” array (see
Figure 9 & Figure 10).
6. Make sure the latching flags are lowered to the side before attempting to the place display on mount.
7. With the aid of another person, lift the first display up to the lower left mount. Align the mounting
buttons on the display with the teardrop slots in the mount and set the display into place (see
Figure 10).
8. Install remaining displays in order shown in Figure 10.
9. Raise the latching flags to secure displays.
10. Slide displays together to form 84” diagonal array (see Figure 11).
