background image

Installation Instructions

PAC521N

7

PAC521N Installation

1.

Secure PAC521N to studs. (See Figure 6)

WOOD STUD (16" on center, 2" x 4" wood stud):

1.

Drill at least two to four 3/16" diameter pilot holes in
studs at mounting holes.

2.

Install PAC521N with two to four M7 x 40mm Allen
head connector screws (E) into pilot holes using the
M4 Allen head drill bit (F).

STEEL STUD (2" x 4" / 25ga minimum):

Steel stud type and structural strength must conform
to the North American Specification for the Design of
Cold-Formed Steel Structural Members [362, 125 18,
C-Shape, S-Stud Section] with 1/2" minimum drywall
thickness on both sides of stud.

1.

Drill at least two to four 1/4" diameter pilot holes in
studs at mounting holes.

2.

Install PAC521N with two to four 1/4" x 2" Phillips
flat head self-drilling screws (D) into pilot holes.

Figure 6

DANGER:

IMPROPER WIRING CAN LEAD TO DEATH

OR SEVERE PERSONAL INJURY!  Grounding must be
installed by qualified personnel using a UL Recognized No.
12AWG Green grounding wire connected to grounding lug on
mount.

WARNING:

ELECTRICAL SHOCK HAZARD! Turn off

power to device before performing service.

NOTE:

The grounding lug is located in one of two locations and

can be moved to the other location if necessary. (See
Figure 7)

Figure 7

Mounting
holes

Mounting
holes

Mounting
holes

Mounting
holes

2

1

Grounding lug location

Summary of Contents for PAC521N









Reviews: