![background image](http://html1.mh-extra.com/html/chief/pac521n/pac521n_installation-instructions-manual_2600238006.webp)
PAC521N
Installation Instructions
6
PAC521N Preparation
1.
Remove and save four Phillips head screws holding four
drywall clamps in place. (See Figure 3)
2.
Turn drywall clamps 90° and slide out of PAC521N.
(See Figure 3)
3.
Add four hole covers (B) to PAC521N. (See Figure 4)
4.
Using the Phillips head screws removed in Step 1, tighten
hole covers (B) in place. (See Figure 4)
Figure 3
Figure 4
WARNING:
ELECTRICAL SHOCK HAZARD! CUTTING
OR DRILLING INTO ELECTRICAL WIRES OR CABLES
CAN CAUSE DEATH OR SERIOUS PERSONAL INJURY!
ALWAYS make certain area behind mounting surfaces is free
of electrical wires and cables before cutting, drilling, or
installing fasteners.
NOTE:
When installing the PAC521N to either wood or metal
studs, there is the option to remove the trim before
installation. (See Figure 5)
Figure 5
1
x 4
2
2
Drywall
clamps
3
3
4
x 4
(B)
(B)
x 4
Trim