Instruction Manual
PAC-Y1
5
MOUNT CENTER SPEAKER
1.
Using four Phillips head screws (150), attach speaker
bracket (50) to speaker (see Figure 6).
2.
Loosely insert top two 1/4-20X1/2” hex head cap screws
(130) securing height adjustment plate (100) on each
side of mount (see Figure 7).
3.
Install speaker bracket (50), with speaker attached, into
teardrop slots and lower into place
4.
Install bottom two 1/4-20X1/2” hex head cap screws
(130) securing height adjustment plate (100) and tighten
all four 1/4-20X1/2” hex head cap screws.
5.
Slide uprights (30 and 40) to accommodate the desired
position and secure in place by tightening 1/4-20X1/2”
hex head cap screws (130).
Phillips Head Screws
Figure 6. Install Speaker Bracket
Height Adjustment Screws
Button Head Cap Screws
