![background image](http://html1.mh-extra.com/html/chief/nalrbw/nalrbw_installation-instructions_2600338003.webp)
Installation Instructions
NALRBW
3
TOOLS / HARDWARE / PARTS
ASSEMBLY AND INSTALLATION
NOTE:
The NALRBW rack service lights are designed for use
with 19" wide equipment racks. See the specific
installation instructions provided with the rack for
additional installation information.
1.
Attach the NALRBW (A) within the rack, using four 10-32 x 3/4"
header point Phillips screws (not included). (See Figure 1)
Figure 1
2.
Plug the appropriate adapter (C, D, or E) into the DC power
supply (B).
3.
Plug power supply into back of NALRBW (A). (See Figure 2)
4.
Secure power supply plug using a cable tie (not included)
through the cable tie mount. (See Figure 2)
Figure 2
5.
Plug the power supply (B) into an available outlet.
6.
Turn on light with power supply cord switch.
7.
Complete the installation following the rack installation
instructions.
A (1)
[NALRBW]
B (1)
[DC power supply]
Hardware required,
(4) 10-32 x 3/4" header
(1) 4" cable tie
C (1)
[EU Adapter]
not included:
point Phillips screws
D (1)
[GB Adapter]
E (1)
[AU Adapter]
(A)
1
x 4
(NE1F2023 rack shown with NALRBW)
3
(A)
Cable tie
mount
(rear view)
4