Installation Instructions
MTSAV, -BV, -CV
7
Setting Rotation Limits
1.
Rotation is factory-set at 270
o
but can be changed to 0, 10,
20, 30 or 40
o
to avoid damage to furniture or walls from
display hitting them when rotated. (See Figure 7)
2.
Determine amount of rotation allowed in installation and
insert one 10-24x1/4" button head security screw (U) into
the appropriate hole. Tighten to secure rotation amount.
(See Figure 7)
Figure 7
Cable Management
WARNING:
ELECTRICAL SHOCK HAZARD! Improper
routing can lead to wires or cables being damaged. Make
certain display power cable is not routed through areas
where it can be pinched or cut.
1.
Route display cables and wiring either through front inside
of post and down through mounting surface, or through
cable management hole at base back. (See Figure 8)
Figure 8
2.
If wires will be routed through post and down through
mounting surface, place cable management cover (C) over
cable management hole. (See Figure 9)
3.
Connect wires and cables to display.
Figure 9
40
o
30
o
20
o
10
o
o
o
(U) x 1
MTS (back view)
Cable routed through
cable management hole
Cable routed through
mounting surface
(C)
MTS
(back)
