Installation Instructions
MSR Series
3
CONTENTS
DIMENSIONAL DRAWING ..................................... 2
TOOLS REQUIRED FOR INSTALLATION.............. 3
PARTS LIST .............................................................. 3
MSR INSTALLATION .............................................. 4
Select And Prepare Mounting Location.................... 4
Mount the MSR ....................................................... 5
ATTACH MSB TO THE DISPLAY ........................... 6
INSTALL THE DISPLAY .......................................... 6
REMOVE THE DISPLAY.......................................... 6
TOOLS REQUIRED FOR
INSTALLATION
Drill and drill bit set
Wrench set
NOTE:
Other tools may be required depending on your
method of installation.
Figure 1. Parts
PARTS LIST
Prior to assembly, unpack the carton completely. Verify
contents listed in Table 1 and Figure 1.
Read installation instructions completely. If you are
missing any of the listed parts, contact Customer Service
at: 1-800/582-6480.
Table 1. Parts List
REF
DESCRIPTION
QTY
10
MSR-Series Static Mount
1
20
*BOLT, Lag, 5/16” x 2 1/2”
2 or 4
30
*WASHER, 5/16”
2 or 4
**Extender, Latching Flag (not shown)
1
**Screw, Phillips Machine, 10-24 x 1/2”
(not shown)
1
**Nut, Lock, 10-24 (not shown)
1
** Included in Latching Flag Extension Kit
* Quantity required is dependent upon mounting
configuration chosen during installation. See “MSR
Installation” section of this document to determine
appropriate quantities.
10
Lag Bolts
20
Washers
30
