Model: MSP-WRTS1
Installation Instructions
2
TOOLS REQUIRED FOR INSTALLATION
•
9/16" Wrench
•
7/32" Hex Key (provided)
•
Phillips Screwdriver
PARTS
Unpack carton, inspect and verify contents. Read
installation instructions completely. If any listed parts are
missing, contact Chief Customer Service at 1-800-582-
6480.
IMPORTANT WARNINGS AND CAUTIONS!
WARNING:
A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.
CAUTION:
A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING:
It is the installer’s responsibility to make sure the structure to which this unit is attached can support five
times the combined weight of all equipment. Reinforce the structure as required before installing the unit. Failure to
provide adequate structural strength for this unit can result in serious personal injury or damage to equipment!
WARNING:
It is the installer’s responsibility to make sure the combined weight of the display, mount, accessories,
and any other attached equipment must not exceed 75lbs (34kg), the maximum support weight of this unit. Exceeding
the maximum support weight can result in serious personal injury or damage to equipment!
WARNING:
Make sure the latches securing the display are fully closed at all times except when removing or installing
the display. The latches must be fully closed when installing or removing cables from the display.
WARNING:
Watch for pinch points. Do not put your fingers between movable parts.
