![background image](http://html1.mh-extra.com/html/chief/m30/m30_instruction-manual_2601208006.webp)
6
5. THE WELDING MODE SETTING INSTRUCTIONS
1.) Auto mode
When setting Auto Mode, the machine can weld without pressing the torch switch. Make sure the torch, work cable, and
work piece have a good connection, wait for the delay timer, the machine will output power and welding. When setting
welding time up, the machine will stop output, lift the torch from the work piece. If the torch contacts the work piece again,
the machine will output again.
Note:
The torch must not make constant contact with the work piece. After welding is completed and the torch and work
piece are still contacting, the machine will show an error warning. The power indicator LED will blink indicating an error,
you must lift the torch from the work piece before resuming welding.
2.) Manual mode
Contact the torch to the work piece and press the torch switch, the machine will begin welding. If the user selects the
welding timer, the machine will stop welding when the welding time is up. If the user selects continuous welding, the ma-
chine will keep welding utill the user turns off the torch switch.
6. INSTRUCTIONS FOR CAR REPAIR WORK
Spot Welding
1.) Power switch on, set suitable function.
(Auto, Manual-Timer, or Pulse)
2.) Set the spot welding current.
3.) Set work clamp.
4.) Spot-weld the washer.
Attention:
The work clamp should be near the welding location.
Summary of Contents for M30
Page 10: ...NOTES 10 ...
Page 11: ...NOTES 11 ...