Installation Instructions
KRA235
7
6.
Tighten upper two screws. (See Figure 4)
7.
Re-install two Phillips screws that were removed in Step 4
through lower inside mounting holes on K3/K4 head
assembly. (See Figure 4)
Figure 4
8.
Re-install K3/K4 mounting head to array arm.
Height Adjustment
1.
Turn height adjustment knob clockwise to raise display
level. (See Figure 5)
2.
Turn height adjustment knob counter-clockwise to lower
display level. (See Figure 5)
Figure 5
(A)
K3/K4 mounting
head assembly
6
x 2
x 2
7
2
1
1
2
