Installation Instructions
HVP
3
TOOLS / PARTS FOR INSTALLATION
#2
A (1)
[HVP panel]
B (2)
[screw w/washer]
ASSEMBLY AND INSTALLATION
1.
Determine mounting position on rack.
2.
Use two Phillips screws with washers (B) to loosely attach
HVP panel (A) to rack at desired mounting location. (See
Figure 1)
NOTE:
Do NOT tighten screws at this point or it will be difficult
to align pre-installed screws on other side with
corresponding holes.
Figure 1
3.
Align pre-installed screws with corresponding holes and
screw into holes until tight. (See Figure 2)
4.
Tighten two screws with washers (B) to secure panel to rack.
(See Figure 2)
Figure 2
2
(B) x 2
rack (example)
(A)
3
4
(B) x 2
