CHIEF MANUFACTURING INC.
8807-000019 Rev. A
1-800-582-6480
952-894-6280 FAX 952-894-6918
2004 Chief Manufacturing
8401 EAGLE CREEK PARKWAY, STE. 700
www.chiefmfg.com
SAVAGE, MINNESOTA 55378 USA
06/04
I N S T A L L A T I O N I N S T R U C T I O N S
Small Flat Panel
Tilt Wall Mount (GPM-110)
BEFORE YOU BEGIN
•
CAUTION: To prevent damage to your display, which could affect or void the Factory warranty,
thoroughly study all instructions and illustrations before you begin to install the mount brackets. Pay
particular attention to the “Important Warnings and Precautions” on Page 2.
•
If you have any questions about this installation, contact Chief Manufacturing at 1-800-582-6480 or 952-582-6480.
The GPM-110 tilt wall mount is designed to adapt to
VESA® 75mm/100mm compliant displays.
The GPM-110 allows the user to adjust the viewing angle
of the mount
+
15 degrees horizontally or vertically by
hand, depending on the preferred type of installation.
After adjusting the display to the desired angle, the user
can lock the mount into a fixed position. The user can
easily remove the display from the wall bracket when the
mount is unlocked.
GPM-110
