Installation Instructions
FCA831/841
9
Attaching to Cart/Ceiling Mount
1.
Use eight 1/4-20 hex nuts (H) to loosely secure four t-slot
studs (F) to two clamp brackets (C). (See Figure 7)
IMPORTANT ! :
Do NOT tighten at this time. Leave
enough space between studs and brackets so that studs
can slide into cart extrusion slots. (See Figure 9)
Figure 7
2.
Install two clamp brackets (C) onto two rail extensions (B).
(See Figure 8)
3.
Install four 5/16-18 x 1/2” button head flange screws (P) to
ends of rail extensions (B). (See Figure 8)
Figure 8
4.
Slide t-slot studs (F) into grooves on back of extrusion until
desired mounting positions are reached. (See Figure 9)
Figure 9
5.
Tighten four 1/4-20 hex nuts (H) holding t-slot studs (F) to
clamp brackets (C). (See Figure 10)
6.
Use four 1/4-20 hex nuts (H) to secure two clamp covers (D)
to two clamp brackets (C). (See Figure 10)
Figure 10
(C) x 2
(H) x 8
(F) x 4
1
2
2
3
(P) x 4
(C) x 2
(B) x 2
4
4
(F) x 4
extrusion
5
(H) x 4
(rear view)
6
(H) x 4
(D) x 2
(C) x 2