Installation Instructions
FHB5133/7133
3
TOOLS / PARTS FOR INSTALLATION
ASSEMBLY AND INSTALLATION
1.
Install wall mount to wall following mount instructions up
until the interface brackets are to be attached to the display.
2.
Lay display face down on a protective surface.
3.
Position three spacers (E) over three holes on back of
display. (See Figure 1)
4.
Install two M8 x 30mm button head cap screws (D) through
channel bracket (A), spacer (E) and into back of display.
(See Figure 1)
NOTE:
Use alignment hole in channel brackets to line up the
wall mount interface brackets for a vertically centered
mount. (See Figure 2)
Figure 1
5.
Install one M8x35mm Phillips pan machine screw (C)
through wall mount interface bracket, channel bracket (A),
spacer (E) and into back of display. (See Figure 1)
6.
Use two 5/16-18 x 1/2" button head cap screws (B) to
secure wall mount interface bracket to channel bracket (A).
(See Figure 1)
7.
Repeat Steps 3-6 for other channel bracket.
Figure 2
8.
Complete the installation following the mount installation
instructions.
3/16" (included)
A (2)
[channel
bracket]
D (4)
M8x30mm
E (6)
3/4"
C (2)
M8x35mm
B (4)
5/16-18 x 1/2"
M5 (included)
#2
M5
3/16"
F (1)
G (1)
4
(E) x 3
(A)
(D) x 2
(C)
5
6
3
(B) x 2
wall mount
interface bracket
(example only)
alignment hole in
channel bracket shows
through diamond
in wall mount
interface bracket
for centered mount
