background image

FCA776

Installation Instructions

2

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively "Milestone"), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies.
All rights reserved.

 IMPORTANT SAFETY INSTRUCTIONS!

WARNING:

A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION:

A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the
corresponding instructions.

WARNING:

Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty!  It is the
installer’s responsibility to make sure all components are
properly assembled and installed using the instructions
provided.

WARNING:

Failure to provide adequate structural strength

for this component can result in serious personal injury or
damage to equipment!  It is the installer’s responsibility to
make sure the structure to which this component is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
component.

WARNING:

Exceeding weight capacity can result in

serious personal injury or damage to equipment!  It is the
installer’s responsibility to make sure the combined weight of
all components does not exceed the maximum allowable
weight capacity of the mount to which this accessory is being
installed. Consult Table 1 for mounting system’s weight
capacity details.

WARNING:

Exceeding the weight capacity can result in

serious personal injury or damage to equipment! Using
FCA776 instead of casters does not change the weight
capacity listed for the mount. Consult Table 1 for mounting
system’s weight capacity details.

WARNING:

Use with displays weighing more than the

maximum weight indicated in Table 1 may result in instability
causing tip over resulting in death or serious injury.

WARNING:

Use this mounting system only for its intended

use as described in these instructions. Do not use
attachments not recommended by the manufacturer.

WARNING:

Never operate this mounting system if it is

damaged. Return the mounting system to a service center for
examination and repair.

WARNING:

Do not use this product outdoors.

NOTE:

The FCA776 may be used with UL Listed LVM2X2U,

LVM3X2U, LVM3X3U, LVM3X1UP, LVM2X2UP and
LVM3X2UP.

Table 1: Weight Capacities

NOTE:

The FCA776 has no user serviceable parts.

--SAVE THESE INSTRUCTIONS--

MODEL

Max Weight
Allowed for EACH
Display

Max Weight
Capacity of
Mounting System

LVM2X2U

125 lbs

(56.7 kg)

500 lbs

(226.8 kg)

LVM3X2U

125 lbs

(56.7 kg)

750 lbs

(340.2 kg)

LVM3X3U

100 lbs

(45.4 kg)

900 lbs

(408.2 kg)

LVM3X1UP

125 lbs

(56.7 kg)

375 lbs

(170.1 kg)

LVM2X2UP

100 lbs

(45.4 kg)

400 lbs

(181.4 kg)

LVM3X2UP

100 lbs

(45.4 kg)

600 lbs

(272.2 kg)

Summary of Contents for FCA776









Reviews: