![background image](http://html1.mh-extra.com/html/chief/ez-liner-s21m/ez-liner-s21m_user-manual_2600356004.webp)
R
CHIEF EZ LINER S21M
USERS MANUAL
HYDRAULIC SYSTEM COMPONENTS
The EZ Liner S21M is powered by an electrically oper-
ated hydraulic pump which is operated by a remote
control switch. The components of the system are iden-
tified in Figures 1a, and 1b.
Hydraulic pressure is distributed to tower rams, aux-
iliary rams, and lift ram. The flow of hydraulic fluid to
these rams is controlled by a valve. Hydraulic pres-
sure is monitored by pressure gauges mounted on the
machine’s front towers. To exert hydraulic pressure,
press ‘up’ button on hand-held switch and to release
hydraulic pressure, press ‘down’ button.
2
1.
Pedestal
2.
Removable Loading Ramps
3.
Motor Starting Relay
4.
Power Cord
5.
Joy Cord
6.
Square D Switch
7.
Control Switch Assembly
8.
Reservoir
9.
Motor
Figure 1a
S21M Pump
10.
Tower Valve (S21M)
11.
Tower Ram
12.
Auxiliary Ram Line Valve
13.
Lift Ram Valve
14.
Lift Ram
15.
Pressure Gauge
16.
Auxiliary Ram/Quick Coupler
Assembly
Basic Components
7
4
9
8
15
Figure 1b
12
1
11
3
NOTE: By holding
switch with Control
Cord down, stress
is reduced in this
area of cord.
IMPORTANT: Tower rams and auxiliary rams can
be operated either simultaneously (with equal
hydraulic pressure) or individually. The lift ram
must be operated individually. Whenever using
the hydraulic system, close all valves where
hydraulic pressure is not required.
NOTE: Although the S21M is a low pressure
system, it builds hydraulic pressure quickly.
Be
aware of this quick reaction when making pulls or
lifting vehicle.
10
Down
Button
Up Button
16
14
2
13
6
5