CMA-440 Light Weight
Suspended Ceiling Kit
The CMA-440 Light Weight Suspended Ceiling Kit provides a
sturdy support for LCD/DLP hanging brackets (and certain
other products weighing less than 50 pounds) when installing
these products in a suspended ceiling.
The Kit includes a 8 x 24 in. (203 x 610 mm) reinforcing plate
that will be suspended by four tie wires from the true ceiling
above the suspended ceiling tiles. Turnbuckles allow the instal-
lation to be fine-tuned.
The reinforcing plate can be installed anywhere above a
2’ x 2’ (600 X 600mm) or 2’ x 4’ (600 X 1200mm) ceiling tile
.
Knockouts for
electrical outlet boxes and
antenna leads
Attachment point for safety
cable and clamp
Turnbuckles for
support wires
BEFORE YOU BEGIN
•
CAUTION: To prevent damage to the Kit, which could affect or void the Factory warranty, and to the equipment that
will be attached to it, thoroughly study all instructions and illustrations before you begin the installation. Pay particu-
lar attention to the “Important Precautions” on Page 1.
•
The maximum weight to be installed on the CMA-440 mount is 50 pounds (22.68 Kg).
•
The ceiling tray is designed to fit above a conventional suspended ceiling system.
•
If you have any questions about this installation, contact Chief Manufacturing at 1-800-582-6480.
•
In certain installations, it may be easier to install the ceiling anchors (page 3)
before
you attach the hanger brackets to the ceil-
ing tray.
I N S T A L L A T I O N I N S T R U C T I O N S
CHIEF MANUFACTURING INC.
1-800-582-6480
952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PARKWAY, STE. 700
SAVAGE, MINNESOTA 55378 USA
8810-000006 Rev. E
2006 Chief Manufacturing
06/06
