background image

CMA395

Installation Instructions

2

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively "Milestone"), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies.
All rights reserved.

 IMPORTANT WARNINGS AND

CAUTIONS!

WARNING:

A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION:

A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the
corresponding instructions.

WARNING:

Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty!  It is the
installer’s responsibility to make sure all components are
properly assembled and installed using the instructions
provided.

WARNING:

Failure to provide adequate structural strength

for this component can result in serious personal injury or
damage to equipment!  It is the installer’s responsibility to
make sure the structure to which this component is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
component.

WARNING:

Exceeding the weight capacity can result in

serious personal injury or damage to equipment!  It is the
installer’s responsibility to make sure the maximum weight
installed on the ceiling plate does not exceed 500 lbs (226.8
kg).

DIMENSIONS

5/16 - 18 UNC THREADS

1 1/2" NPT THREADS

112.713

4.44

MAX HEIGHT

90.00°

95.00°

100.00°

41.275

1.63

.44

Summary of Contents for CMA395

Page 1: ...Instruções de Instalação Istruzioni di installazione Installatie instructies Instructions d installation Angled Ceiling Adapter Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description CMA395 ...

Page 2: ...ollow the instructions CAUTION A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corresponding instructions WARNING Failure to read thoroughly understand and follow all instructions can result in serious personal injury damage to equipment or voiding of factory warranty It is the installer s responsibility to make sure all components are properl...

Page 3: ...to desired angle See Figure 1 3 Tighten two angle adjustment screws See Figure 1 4 Install extension pipe in coupler and secure using the set screw C See Figure 1 Figure 1 5 If necessary remove hex head bolt running through pipe channel in order to allow cables to be routed through pipe See Figure 2 NOTE If cables are small enough to fit between bolt and pipe bolt does not need to be removed 6 Rou...

Page 4: ... 130 5611 ZB EINDHOVEN The Netherlands P 31 0 40 2668620 F 31 0 40 2668615 Asia Pacific A Office No 1 on 12 F Shatin Galleria 18 24 Shan Mei Street Fotan Shatin Hong Kong P 852 2145 4099 F 852 2145 4477 Chief Manufacturing a products division of Milestone AV Technologies 8803 002025 Rev00 2011 Milestone AV Technologies a Duchossois Group Company www chiefmfg com 06 11 ...

Reviews: