background image

2

Installation Instructions

FHP

IMPORTANT WARNINGS AND PRECAUTIONS!               

WARNING:

A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.

CAUTION:

A

 CAUTION

 alerts you to the possibility of damage or destruction of equipment if you do not follow the corre-

sponding instructions.

WARNING: Improper installation can result in serious personal injury!  Make sure that the structural members can 

support a redundant weight factor five times the total weight of the equipment:  if not, reinforce the struc-
ture before installing the FHP.

WARNING: Be aware also of the potential for personal injury or damage to the unit if it is not adequately mounted.

WARNING: The installer is responsible for verifying that the ceiling to which the FHP is anchored will safely support 

the combined load of all attached components or other equipment

.

WARNING: The weight of the display placed on the FHP must not exceed 40 lbs. (18.1 kg), the maximum load capacity 

of the FHP

.

WARNING: Watch for pinch points. Do not put your fingers between movable parts.

WARNING: Make sure the mount and brackets are correctly oriented.

CAUTION:

Check the unit for shipping damage before you begin the installation.

TOOLS REQUIRED FOR INSTALLATION

Saw (to cut plastic)

Electric drill and bit set

Phillips Screwdriver

Level

NOTE:  Other tools may be required depending on the

      mounting surface and method of installation.

CONTENTS                                                                                            

DRAWINGS ................................................................

2

INSPECT THE UNIT BEFORE INSTALLING .............

3

FHP INSTALLATION ..................................................

3

DISPLAY INSTALLATION ..........................................

4

CABLE MANAGEMENT  .............................................

5

ADJUSTMENTS .........................................................

5

Summary of Contents for Centris FHP-110









Reviews: