![background image](http://html.mh-extra.com/html/chief/avr1/avr1_installation-instructions-manual_2601203006.webp)
AVR1
Installation Instructions
6
System Overview
This manual covers the installation of the Co-Pilot™ system in a
typical classroom.
Refer to the Figure 1 below for an overview of a typical
classroom. The installation procedure outlined in this manual
may need to be adjusted in order to accomodate for atypical
classroom layouts.
The Co-Pilot™ system can be installed into rooms of any size,
however the RF wireless capability is limited to a coverage area
of 160 square feet (14.68 square meters).
NOTE:
Chief® offers additional mounting components that can
be used for custom installations.
Determine Mounting Locations
1.
Take all of the following into consideration when
determining mounting locations of projector, speakers and
input boxes.
•
Room size, orientation and layout
•
Safety requirements
•
Ceiling and wall types
•
Room lighting
•
Location of whiteboard
•
Location of teacher’s desk
•
Students’ seating arrangement
INSTALLATION
1.
Mount projector according to the installation manuals
included with projector mounting devices (if applicable).
2.
Mount speakers according to the installation manual
included with the speaker kit being used.
3.
Install AVM1 modules according to the installation manual
included with the modules.
4.
Install any accessories purchased referring to the
installation manuals included with each accessory.
Figure 1
teacher’s desk
AVxVR
projector
speakers
whiteboard
AVMV
AVMA
AVMW
Classroom Overview (example)