![background image](http://html1.mh-extra.com/html/chief/124-series/124-series_user-manual_2600213011.webp)
MERCEDES UNIVERSAL ADAPTER
SERIES 124, 129, 140, 170, 202, 208, 210, & 220
1 Bolt, 1/2-13NC x 3, Gr. 8
2 Washer, 1/2
3 Washer, 2 1/2 x 13/16 ID x 1/8
4 Mercedes Uni. Adapter Base
5 Spacer, 1/8
6 Spacer, 1/4
7 Mercedes Pin Plate Adapter Ass’y
8 Outer Support Pin
9 Nut, 1/2-13NC, Gr. 8
(refer to part numbers — page 1)
Mercedes 220 Series Front
S-Class Sedan
Mercedes 220 Series Rear
S-Class Sedan
(Rev.6/02)
Application Instructions:
1. Remove conventional clamp jaws.
2. Install pin plate adapter and universal adapter base on opposite sides of clamp.
IMPORTANT:
Insert correct number of 1/4 inch spacers as shown. The front stand requires
two 1/4” spacers and the rear stand requires three 1/4” spacers plus a 5/8 inch
optional spacer.
3. Install four washers (090784) on adapter base as shown.
4. Insert outer support pin into pin plate adapter.
5. Lower vehicle onto universal adapter base while guiding pins into jack holes.
9
1
8
1
8
7
Requires 5/8”
Optional Spacer
6
4
3
9
2
7
6
4
3
9
2