manualshive.com logo in svg

Chicco Fit 4, User Manual

Share
Download
Chicco Fit 4 User Manual Download Page 26

49

VEH

ICLE INFORMATION

48

VEH

ICLE INFORMATION

VEHICLE SEATING POSITIONS

VEHICLE SEATING POSITIONS

The back seat is the safest place for children 12 and under.  See your
vehicle owner’s manual for Child Restraint installation and instructions.

 

WARNING!  WHEN USING THIS CHILD RESTRAINT 

REAR-FACING, DO NOT PLACE THIS CHILD RESTRAINT 

IN A VEHICLE SEATING LOCATION WITH A FRONTAL AIR 

BAG, UNLESS THE AIR BAG CAN BE TURNED OFF.

Some vehicles have no seating 

positions which are compatible 

with this Child Restraint.  If in 

doubt, contact the vehicle 

manufacturer for assistance.  

Only forward-facing vehicle 

seats should be used with this 
Child Restraint.    

Make sure no more than 3 inches 

of the Child Restraint base is past 

the edge of the vehicle seat.

Do not use on a folded 

down vehicle seat back.

When using the seat as 

BOOSTER

, always 

install in a vehicle seat with a 3-point seat 

belt (shoulder belt and lap belt).  NEVER 

use lap belt only.

Summary of Contents for Fit 4










































































Reviews:

No comments

Brands by name

Popular brands

Load more brands