Chicco Baby Control Audio Digital Compact, Instructions For Use Manual

Page: 24 / 148

24 25
with urban waste; dispose of them at an appro-
priate differentiated collection point according to
the laws in force.
3.1 Replacing alkaline batteries on the child unit
(primarily in transmitter mode)
Slide open the battery compartment cover on
the back of the unit to remove the 2 spent alka-
line batteries from the compartment and replace
them with 2 identical 1.5 Volt AAA batteries,
making sure they are inserted with the poles in
the right direction as indicated on the compart-
ment. Slide the battery compartment cover (8)
back into place.
3.2 Fitting the rechargeable batteries inside the
parent unit
(primarily in transmitter mode)
When you purchase the product, the rechargeable
batteries (13) are not fitted inside the parent unit
(primarily in receiver mode) and are packed sepa-
rately inside the box.
Remove the rechargeable batteries compartment
cover (10) from the parent unit. Fit the recharge-
able batteries (13) checking the pole directions.
Press the rechargeable battery pack compartment
cover (10) back into place.
3.3 Replacing rechargeable batteries inside the
parent unit
(primarily in transmitter mode)
Remove the rechargeable batteries compart-
ment cover (10) on the back of the parent unit.
Remove the rechargeable batteries (13) if spent,
and replace them with new identical rechargeable
batteries (13) identical to those supplied with
the product, i.e. NiMh 1.2V 750 mAh tipo AAA
(20126300100 code to be requested from Artsana
S.p.A.) making sure they are fitted with the poles
in the right direction, as indicated on the compart-
ment. Press the rechargeable battery pack com-
partment cover (10) back into place.
4. Carry strap
To attach the carry strap to the parent unit cord,
proceed as follows:
• Slide the cord through the slot (diagram 12)
• Slide the strap inside the cord as seen in diagram
13a – 13b.
The strap (diag.14) allows you to carry the unit
around with you, as seen in diag. 15.
Warning. Keep the carry strap out of the reach of
children.
4. Case
When assembled and not in use, the Baby Control
Audio Digital Compact, can be stored away in its
own case. The carry strap (diag. 14) allows you to
carry both assembled units around inside the case
as seen in diagram 15. In particular:
• Place both assembled units inside its case, as
seen in diag.16
• Slide both zips toward the centre to close the
case, making sure that the carry strap does not
get caught in the zip (see diag. 16).
Warning. Keep the case out of the reach of chil-
dren.
4.1 Cleaning and maintenance of the case
Please refer to the instruction label inside the case
for information on how to clean the case.
TECHNICAL FEATURES
Child Unit (primarily in transmitter mode)
Mod.06026
Power supply:
Internal: ALKALINE BATTERIES 2 X 1.5V TYPE
AAA/LR03
External: via mains adaptor: 100-240V ~ 50/60Hz
/ 6V
500mA
Transmission (/reception - Talk Back mode):
• Transmission (/reception) frequency channel:
1880 -1900Mhz
- Transmission output: 250mW max
Parent Unit (primarily in receiver mode)
Mod.06026
Power: Rechargeable batteries NiMh 2x1.2V TYPE
AAA 750mAh
External rechargeable battery charger: via mains
adaptor 100-240V ~ 50/60Hz / 6V, 500mA
Reception (/transmission - Talk Back mode):
• Reception (/transmission) frequency channel:
1880 - 1900Mhz
- Transmission output: 250mW max
Mains Adaptor
Mod. IA5060G
100-240V ~ 50/60Hz / 6V 500mA
Plug pole:
Made in China