Chicco Baby Control Audio Digital Compact, Instructions For Use Manual

Page: 20 / 148

20 21
WARNING!
TO PREVENT THE RISK OF ELECTRIC
SHOCKS, NEVER REMOVE THE PRO-
TECTION COVER OR TRY TO OPEN THE MAINS
ADAPTORS.
NEVER WET THE MAINS ADAPTORS, CHILD UNIT
OR PARENT UNIT, NEVER EXPOSE THEM TO HU-
MID ENVIRONMENTS AND NEVER TRY TO OPEN
THEM. THIS CAN ENDANGER YOUR SAFETY AND
WILL INVALIDATE THE WARRANTY.
1. Configuration & Characteristics
Control devices which use DECT transmission
technologies can be used as an auxiliary appa-
ratus to monitor children in domestic environ-
ments. This baby control comes with a child unit
(primarily in transmitter mode) and a parent unit
(primarily in receiver mode).
Both devices use DECT digital technology to es-
tablish wireless radio contact that transmits and
receives sound.
1.1 System features
The main system features are:
• Vocal transmissions using a DECT digital tech-
nology system.
• Operating range in open spaces without any ob-
stacles of around 300 metres*.
• User-friendly units.
* The maximum operating distance is around
300 metres in an open space without obstacles
and fully charged batteries (this range could be
reduced considerably indoors according to the
environmental situations, the layout of walls
and furniture, the presence of metal structures,
electromagnetic fields/disturbances of internal
or external origin, reinforced concrete walls, when
rooms are located on different floors, or when the
batteries are not charged completely etc.)
1.2 Child unit
(primarily in transmitter mode)
Model 06026
1. Switching power supply a
100-240V ~ 50/60Hz /6V
500mA
or 2 alkaline 1.5V type AAA /LR03 batteries (not
included)
2. ON/Off button
3. Nightlight ON/Off button
4. 1 2-coloured green/red LED:
(a) Fixed green: power ON and correctly con-
nected to the parent unit;
(b) Blinking red (2 blinks a second): alkaline bat-
teries are low
(b) Blinking green (2 blinks a second): connection
with the parent unit lost;
5. Integrated Microphone
6. Integrated speaker to reproduce the parent’s
voice
7. Volume adjustment button (8 levels)
+ -
8. Battery compartment cover
9. Child unit power connector
1.3 Parent Unit (primarily in receiver mode)
Model 06026
1. Powered by rechargeable NiMh 2x1.2V, 750
mAh type AAA batteries (included) or switch-
ing mains adaptor 100-240V ~ 50/60Hz / 6V,
500mA.
2. ON/Off button
3. Volume adjustment button (8 levels)
+ -
4. 3 orange LED indicators for sound levels re-
ceived from the child unit.
5. 1 2-coloured green/red LED:
(a) Fixed green: child unit is connected and work-
ing properly;
(b) Blinking green (2 blinks a second): connection
with the child unit lost;
(b) Blinking red (2 blinks a second): rechargeable
batteries are nearly flat or loss of connection with
the child unit (only with rechargeable batteries
being recharged with the relative mains adaptor)
(a) fixed red: rechargeable battery charge phase
6. Integrated speaker to reproduce the sounds
from the child’s room.
The speaker also has the additional functions
seen below:
a) Warning signal when contact is lost between
the child unit and the parent unit: If there is no
connection when the device is switched on, or if
connection is lost when being used, 2 acoustic sig-
nals will be triggered after around 10 seconds. As
soon as connection with the child are reinstated,
the warning signal will be disabled;
b) Rechargeable batteries low battery warning
function: it beeps once every second. Recharge
the rechargeable batteries.