17
16
appliance) correspond to those provided by your mains network. The electrical system where the
appliance is used must conform to all safety regulations in force in the country the appliance is
being used.
- Connect the appliance to a mains socket that is easy to access.
- Never place the bottle warmer directly on or near hot surfaces, hobs, or onto delicate surfaces or
surfaces that may be sensitive to humidity and/or heat.
- Use heat-resistant glass or heat-resistant plastic feeding bottles only: never use disposable feed-
ing bottles.
- When using the product normally, always pay attention to the hot steam generated by the heated
water to prevent burns
- For hygiene-biological reasons, bottle warmers must be used for warming ready-to-eat meals,
and never to cook them. The ideal temperature when warming food is around 37°C . Never reheat
food more than once, or for over an hour.
- The final temperature of the food and the warming cycle time both depend on the amount
of food being reheated, the starting temperature (ambient, fridge or freezer temperatures), the
consistency of the mix, the selected warm-up cycle, plus the type and size of the containers
(plastic feeding bottles, glass feeding bottles, jars of baby food) and the amount of water in the
heating tank.
- After three minutes from the end of the warm-up cycle, or three minutes of inactivity, the appli-
ance will automatically switch to standby mode; allow it to cool down completely before using
it again.
- Never touch the bottle warmer with wet or damp hands.
- Never touch the bottle warmer if it accidentally falls into water; unplug it immediately and do not
use it again; contact expert qualified operators or Artsana S.p.A. for further instructions.
- If the bottle warmer is faulty and/or not working correctly, switch it off immediately and discon-
nect the plug from the mains socket. Do not attempt to open and/or tamper with the product.
Contact your retailer or one of Artsana S.p.A.’s authorised service centres.
- If any repair work is needed, contact expert qualified operators or Artsana S.p.A. only. Incorrect
repairs performed by unauthorised technicians can cause serious damage or injury to users.
- If you have any doubts on the contents of this instruction manual, please contact your retailer
or Artsana S.p.A..
- When disposing of packaging, parts which wear out or the appliance itself, dispose of them at
an appropriate differentiated collection point, as requested by the laws in force in each country.
SYMBOLS KEY
= double insulation
= Appliance in compliance with the essential requirements laid down in EC Directives in
force.
= WARNING!
= user instructions
= please read the instruction manual
= for indoor use only
Dear customer,
We thank you and congratulate you on your choice. The Digit Bottle Warmer allows warming milk
and baby food quickly and safely.
Compatible with most feeding bottles and food jars on the market.
You can choose the warming mode that best suits your needs by selecting the initial temperature
of the milk or baby food. Plus the defrost function is safer than the microwave for defrosting.
Before using this bottle warmer, please read these instructions carefully and keep them for future
reference.
DESCRIPTION
(fig. 1)
a) Main body
b) Baby food jar/feeding bottle support
c) Power cord
d) Selector buttons
d1) Display
d2) Feeding Bottle (capacity)/Jar selector button
d3) Food starting temperature selector button
d4) Timer selection button
d5) ON/OFF button
USER INSTRUCTIONS
Warning: We recommend sanitising and/or disinfecting the feeding bottle with care before fitting
inside the bottle warmer. Never use the bottle warmer without water in the heating tank.
To pour the correct amount of water into the tank, use the feeding bottle which is marked with
graduated scale or other suitable recipients. Never place the appliance under running water to fill
the tank up.
Before performing the steps illustrated below, make sure the power cord (c) is unplugged from
the mains socket.
1. Place the bottle warmer on a flat, level surface.
2. Pour water inside the main body (a) as follows:
Feeding Bottle (capacity) or jar
Feeding bot-
tle approx.
150 ml/5 oz
Feeding bottle
approx.
250 ml/9 oz
Feeding bottle
approx.
330 ml/11 oz
Baby food jar
Starting
temperature
20°C
20 ml
40 ml
80 ml
5°C
-18°C
40 ml
60 ml
NB: The quantities of water needed for warming indicated above refer to Chicco feeding bottles
and 80-ml jars. We recommend using the same quantities for feeding bottles of other brands and
jars of different sizes making sure though to check the temperature of the food at the end of the
warming cycle (max 37°). If the food is not hot enough, repeat the warming cycle.
3. Slowly insert the baby food jar/feeding bottle support (b) inside the main body (a) and:
• FEEDING BOTTLE: complete with ring and teat fit on the bottle without the cup.
• FOOD JAR: without lid and any labels.
WARNING:
small jars and feeding bottles must be placed on the baby food jar/feeding
Summary of Contents for 00007390000000
Page 2: ...2 ...
Page 3: ... 1 a b d c d1 d2 d3 d4 d5 ...
Page 170: ...170 NOTE ...
Page 171: ......