Page 9
For technical questions, please call 1-800-444-3353.
SKU 67434
troubleshooting
Problem
Possible Causes
Likely solutions
Tool will not start.
Battery Pack not properly seated.
1.
Battery Pack needs charging.
2.
Connection to Battery pack
3.
damaged.
Check that Battery Pack is fully inserted
4.
into tool so that it snaps into place.
Charge Battery Pack.
1.
Check that the terminals inside the tool
2.
are not bent or missing. Have repaired by
a qualified technician if needed.
Tool operates slowly.
Battery Pack needs charging.
1.
Job is for a more powerful tool.
2.
Charge Battery Pack.
1.
Use a stronger powered tool.
2.
Performance
decreases over time.
Blades dull or damaged.
Keep cutting accessories sharp. Replace
as needed.
Excessive noise or
rattling.
Internal damage or wear. (Bearings,
for example.)
Have technician service tool.
Overheating.
Forcing tool to work too fast.
1.
Blocked motor housing vents.
2.
Allow tool to work at its own rate.
1.
Wear ANSI-approved safety goggles and
2.
NIOSH-approved dust mask/respirator
while blowing dust out of motor using
compressed air.
Follow all safety precautions whenever diagnosing or servicing the
tool. disconnect power supply before service.
