Every 500 hours of
operation (yearly)
Maintenance routines:
♦
Change the hydraulic oil and the hydraulic oil
filter.
♦
Clean the fuel tank.
Hydraulic system, changing the oil
1. Remove the hydraulic oil tank cap (A).
A
B
2. Empty the tank by using a syphon.
3. Clean the inside surfaces.
4. Change the filter element (B).
5. Fill with hydraulic oil.
6. Check the level gauge.
Cleaning the fuel tank
1. Place a container of at least 17 litres under the
fuel tank (A). Clean the surrounding area and
remove the drainage plug.
A
2. Drain out the tank and clean.
3. Replace the drainage plug with a new seal.
4. Refill the tank, check for leaks.
Disposal
A used machine must be treated and disposed of in
such a way that the greatest possible portion of the
material can be recycled and any negative influence
on the environment is kept as low as possible, and
in accordance with local restrictions.
Before a fuel driven machine is deposited it must be
emptied and cleaned of all oil and fuel. Remaining
oil and fuel must be dealt with in a way that does
not adversely affect the environment.
Always send used filters, drained oil and fuel
remnants to environmentally correct disposal.
Storage
♦
Empty the fuel tank before storing the machine.
♦
Clean the machine.
♦
Clean the air filter.
♦
Wipe off any oil and dust that has accumulated
on the rubber parts.
♦
Cover the machine and store it in a dry, dust-free
area.
29
9800 1262 01a | Original instructions
Safety and operating instructions
TR 630, 850
