INSTRUCTION MANUAL
This product is designed for installing and removing
threaded fasteners in wood, metal and plastic. No
other use permitted. For professional use only.
Air Supply Requirements
1. Supply tool with 90 psig (6.2 bar) of clean, dry air.
Higher pressure drastically reduces tool life.
2. Connect tool to air line using pipe, hose, and
fitting sizes shown in the diagram.
Lubrication
1. Use an air line lubricator with SAE #10 oil,
adjusted to two (2) drops per minute. If an air line
lubricator cannot be used, add air motor oil to the
inlet once a day.
2. Monthly, lubricate the drive bushing and ratchet
yoke with a good grade bearing grease.
Periodically, depending upon use, the ratchet
head assembly should be removed, cleaned and
re-greased.
Maintenance
1. Tool should be oiled on a daily basis for best
performance. Every 3 to 6 months the tool's head
should be greased using approved CP Gear
Grease. If the tool loses performance over time,
tool should be sent to a CP Certified Service
Center to be checked and repaired as needed.
2. High wear parts are underlined in the parts list.
3. To keep downtime to a minimum, the following
service kits are recommended:
2050527033 Tune-Up Kit (RP9426 & RP9427)
(Incl: 4, 5, 6, 7, 20, 21, 23, 24, 26, 41)
2050527043 Ratchet Head Replacement Kit (RP9426)
(Incl: 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 36)
2050527053 Ratchet Head Replacement Kit (RP9427)
(Incl: 19, 20, 21, 22A, 23, 24, 25A, 26, 27A, 28)
4. RP9427 has a quick release system. Push the
button to release the socket.
Copyright 2008, Chicago Pneumatic Tool Co. LLC
All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. This applies in particular to trademarks,
model denominations, part numbers and drawings. Use only authorized parts. Any damage or malfunction caused by the use of
unauthorized parts is not covered by Warranty or Product Liability.
RP9426 & RP9427
Air Ratchet
EC DECLARATION OF CONFORMITY
We, Chicago Pneumatic Tool Co. LLC, 13325
Carowinds Blvd., Charlotte NC, 28273 USA, declare
under our sole responsibility that the product to which
this declaration relates, is in conformity with the
requirements of the Council Directive of June 1998 on
the approximation of the laws of the Member States
relating to machinery (98/37/EC).
Machine Name
RP9426 & RP9427 Ratchet Wrench
Machine
Type
Assembly Power Tool for Threaded
Fasteners - No other use is permitted.
Serial
No.
Tools with No. C-00501-2008 or higher
Technical
Data
1/4" Sq. Dr. / 3/8" Sq. Dr.
Rated Speed 275 rpm
Air pressure 90 psi (6.2 bar)
Harmonized
Standards
Applied
EN 792-6
National
Standards
Applied
ISO 8662-1, ISO 15744-
2002
Name
And
Position
Of
Issuer
Bruno Blanchet,
General Manager
Signature
Of
Issuer
Date
Of
Issue
April 1, 2008
Noise & Vibration Declaration*
Sound pressure level 82 dB(A) uncertainty 3 dB(A),
in accordance with ISO 15744-2002. For sound
power, add 11 dB(A).
2
2
Vibration value RP9426 5.5 m/s , RP9427 4.5 m/s ,re.
ISO 8662-1.
For making estimates of daily vibration exposures, useful
information may be found in CEN/TR 15350: 2006,
"Mechanical vibration - Guideline for the assessment of
exposure to hand-transmitted vibration using available
information including that provided by manufacturers of
machinery"
*These declared values were obtained by laboratory type
testing in compliance with the stated standards and are not
adequate for use in risk assessments. Values measured in
individual work places may be higher than the declared
values. The actual exposure values and risk of harm
experienced by an individual user are unique and depend
upon the way the user works, the workpiece and the
workstation design, as well as upon the exposure time and
the physical condition of the user. We, Chicago Pneumatic,
cannot be held liable for the consequences of using the
declared values, instead of values reflecting the actual
exposure, in an individual risk assessment in a work place
situation over which we have no control.
English
EN
1/2" (12mm)
3/8" (10mm)
3/8" (10mm)
3/8" (10mm)
CA048361 (1/2")
CA048362 (1/2")
CA048360 (1/2")
3/8" (10mm)
3/8" (10mm)
130
90
0
click
click