SKU 93761
Page 4
For technical questions, please call 1-800-444-3353.
18.
Guard against electric shock
.
Do not open the metal case with power connected or capacitors
charged;
risk of electric shock.
Prevent body contact with grounded surfaces such as pipes, radia-
tors, ranges, and refrigerator enclosures during installation.
Connect all wires securely.
Store tools and metal objects away from the inverter.
19.
Do not operate inverter if under the influence of alcohol or drugs
. Read
warning labels on prescriptions to determine if your judgment or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the inverter.
20.
People with pacemakers should consult their physician(s) before using
this product.
Electromagnetic fields in close proximity to a heart pacemaker
could cause interference to or failure of the pacemaker.
21.
Keep the Inverter well-ventilated.
Do not place any objects on top of or next to
the Inverter or allow anything to cover the cooling fans; doing so can cause the
Inverter to overheat, causing a potential fire hazard and/or damage to the In-
verter. Leave adequate ventilation space underneath the Inverter as well; thick
carpets or rugs can obstruct air flow, causing the Inverter to overheat.
22.
A vehicle’s engine must never be used in any sealed structure.
Carbon
monoxide is produced during operation and is DEADLY in a closed envi-
ronment.
Early signs of carbon monoxide poisoning resemble the flu, with
headaches, dizziness, or nausea. If you have these signs, get fresh air immedi-
ately.
Note
: Performance of this unit may vary depending on the available battery power or
appliance wattage.
Warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur. It
must be understood by the operator that common sense and caution are fac-
tors which cannot be built into this product, but must be supplied by the operator.
Unpacking
When unpacking, check to make sure that the Inverter is in good condition.
If any parts are missing or broken, please call Harbor Freight Tools at the number
on the cover of this manual as soon as possible.
