Page 7
For technical questions, please call 1-888-866-5797.
Item 98958
SAFET
y
W
EL
d
IN
g
C
UTTIN
g
M
AINTENANCE
SETU
p
5.
Torch Handle Setup:
a. Remove the plastic inlet covers.
b. Make sure both Check Valves are
in place on the Torch Handle.
c. Connect the green-oxygen hose to the
oxygen Check Valve on the Torch Handle.
d. Connect the red-acetylene hose to the acetylene
Check Valve on the Torch Handle,
tighten counterclockwise -
threads are reversed
.
Check
Valve (OX) Oxygen
Hose
(green)
Check Valve (AC)
Acetylene Hose (red)
Torch
Handle
Assembly Step 5: Torch Handle Setup
6.
Welding Nozzle Setup:
Connect the Welding Nozzle
to the Torch Handle.
Welding Nozzle
Torch Handle
Assembly Step 6: Welding Setup
6a.
Cutting Attachment Setup:
WARNINg! BEFORE CONNECTINg,
make sure the two
O-Rings on the end of the
Cutting Attachment are
not damaged or missing,
otherwise gases will mix
inside the Torch Handle
and result in flashback
or backfires.
Connect the Cutting Attachment to the Torch Handle.
Then, connect the Cutting Tip to the Cutting Attachment.
Cutting
Attachment
Torch
Handle
Cutting Tip
Assembly Step 6a: Cutting Setup
7.
Before operation, the leak tests on the
following pages must be done after connection
to check for leaks in the system.
Cutting
Attachment
O-Rings
