SKU 98701
For technical questions, please call 1-800-444-3353.
Page 8
adapter. Remove the old fuse and
replace the components in the same
order with a new 15A fuse.
4.
wArning! if the supply cord of
this power tool is damaged, it must
be replaced only by a qualified
service technician.
pleASe reAd THe FOllOwing
cAreFUllY
THE MANUFACTURER AND/OR DISTRIBUTOR
HAS PROVIDED THE PARTS LIST AND
ASSEMBLy DIAGRAM IN THIS MANUAL AS
A REFERENCE TOOL ONLy. NEITHER THE
MANUFACTURER OR DISTRIBUTOR MAKES
ANy REPRESENTATION OR WARRANTy OF
ANy KIND TO THE BUyER THAT HE OR SHE
IS qUALIFIED TO MAKE ANy REPAIRS TO THE
PRODUCT, OR THAT HE OR SHE IS qUALIFIED
TO REPLACE ANy PARTS OF THE PRODUCT.
IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR ExPRESSLy STATES THAT
ALL REPAIRS AND PARTS REPLACEMENTS
SHOULD BE UNDERTAKEN By CERTIFIED
AND LICENSED TECHNICIANS, AND NOT By
THE BUyER. THE BUyER ASSUMES ALL RISK
AND LIABILITy ARISING OUT OF HIS OR HER
REPAIRS TO THE ORIGINAL PRODUCT OR
REPLACEMENT PARTS THERETO, OR ARISING
OUT OF HIS OR HER INSTALLATION OF
REPLACEMENT PARTS THERETO.
Troubleshooting
problem
possible causes
likely Solutions
Tool will not start
Cord not connected.
1.
Vehicle ignition must be turned
2.
to Accessory.
Fuse in Tool cord is blown.
3.
Cigarette lighter fuse in vehicle
4.
is blown.
Check that cord is plugged in.
1.
Turn vehicle ignition to Accessory.
2.
Change Fuse in Tool cord.
3.
Change fuse in vehicle (assure that the
4.
cigarette lighter fuse in the vehicle is 15
Amps).
Follow all safety precautions whenever diagnosing or servicing the
tool. disconnect power supply before service.