SKU 98701
For technical questions, please call 1-800-444-3353.
Page 7
the lug nuts loose but do not com-
pletely unthread them from the wheel
studs.
loosen
Tighten
8. Raise the vehicle at manufacturer
suggested lifting points and complete
unthreading the lug nuts from the
wheel studs. Secure the vehicle with
jack stands (not included).
Perform the necessary tire mainte-
9.
nance.
To put lug nuts back on, use the
10.
buttons to adjust the torque to the
vehicle manufacturers recommended
FT-LB level and squeeze the “T”
(tighten) side of the trigger.
To prevent accidents, turn off the tool
11.
and disconnect its power supply after
use. Clean, then store the tool in-
doors out of children’s reach.
mAinTenAnce And
Servicing
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
TO prevenT
SeriOUS injUrY
FrOm AccidenTAl
OperATiOn:
Allow power switch to return
to its neutral position and
unplug the tool from its
electrical outlet before
performing any inspection,
maintenance, or cleaning
procedures.
TO prevenT SeriOUS
injUrY FrOm TOOl
FAilUre:
do not use damaged
equipment. if abnormal noise
or vibration occurs, have the
problem corrected before
further use.
cleaning, maintenance, and
lubrication
beFOre eAcH USe,
1.
inspect the
general condition of the tool. Check
for loose screws, misalignment or
binding of moving parts, cracked or
broken parts, damaged electrical wir-
ing, and any other condition that may
affect its safe operation.
AFTer USe,
2.
clean external surfaces
of the tool with clean cloth.
cigarette
lighter
Adapter
Spring
15v
Fuse
button
cap
3.
replacing the fuse.
Unscrew the
cap at the end of the cigarette lighter