SKU 98058
For technical questions, please call 1-800-444-3353.
Page 10
speCiFiCatiOns
Electrical Requirements 120 V~ / 60 Hz/15 A
Motor No Load Speed
5,000 RPM
Maximum Cut Depth
2-7/16” @ 90°
1-5/8” @ 45°
Blade Requirements
7-1/4” Diameter with
Minimum Speed of
5,000 RPM; Arbor 5/8”
Sound Level
92 dB @ 3’
Laser Information
Wavelength: 650nm,
Maximum Output: Less
Than 1 Mw, Class I
Laser.
Class I levels of laser
light are not considered
to be hazardous.
unpaCKing
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown on the cover of this manual as soon
as possible.
list of contents
part(s)
description
Qty
35
Circular Saw with Blade
1
78
Rip Fence
1
79
Arbor Wrench
1
80
Allen Wrench
1
instruCtiOns FOr
putting intO use
read the entire impOrtant
saFety inFOrmatiOn
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
tO prevent
seriOus injury
FrOm aCCidental
OperatiOn:
turn the power switch of the
tool to its “OFF” position and
unplug the tool from its
electrical outlet before
assembling or making any
adjustments to the tool.
tO prevent seriOus
injury FrOm Flying
sHrapnel:
do not use any abrasive
wheels on this circular saw.
the saw and its guards are
not designed to accommodate
abrasive wheels.
note:
For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
Operating instruCtiOns
read the entire impOrtant
saFety inFOrmatiOn
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
