background image

SKU 97593 

For technical questions, please call 1‑800‑444‑3353. 

Page 5

7.  This product is not a toy.  Keep it out 

of reach of children.

8.  People with pacemakers should 

consult their physician(s) before use.  

Electromagnetic fields in close prox-

imity to heart pacemaker could cause 

pacemaker interference or pacemak-

er failure.  In addition, people with 

pacemakers should: 

• Avoid operating alone. 

• Do not use with power switch locked 

on. 

• Properly maintain and inspect to 

avoid electrical shock. 

• Any power cord must be properly 

grounded.  Ground Fault Circuit Inter-

rupter (GFCI) should also be imple-

mented – it prevents sustained elec-

trical shock.

9.  Some dust created by power sand-

ing, sawing, grinding, drilling, and 

other construction activities, contains 

chemicals known [to the State of Cali-

fornia] to cause cancer, birth defects 

or other reproductive harm.  Some 

examples of these chemicals are: 

• Lead from lead-based paints 

• Crystalline silica from bricks and ce-

ment or other masonry products 

• Arsenic and chromium from chemi-

cally treated lumber 

Your risk from these exposures var-

ies, depending on how often you do 

this type of work.  To reduce your 

exposure to these chemicals: work in 

a well ventilated area, and work with 

approved safety equipment, such as 

those dust masks that are specially 

designed to filter out microscopic 

particles.  (California Health & Safety 

Code § 25249.5, 

et seq.

)

10.  WARNING: Handling the cord on 

this product will expose you to lead, 

a chemical known to the State of 

California to cause cancer, and birth 

defects or other reproductive harm. 

Wash hands after handling.  (Califor-

nia Health & Safety Code §  25249.5, 

et seq.)

11.  The warnings, precautions, and in-

structions discussed in this instruction 

manual cannot cover all possible con-

ditions and situations that may occur.  

It must be understood by the operator 

that common sense and caution are 

factors which cannot be built into this 

product, but must be supplied by the 

operator.

Vibration Safety

This tool vibrates during use.  Re-

peated or long-term exposure to 

vibration may cause temporary or 

permanent physical injury, particularly 

to the hands, arms and shoulders.  To 

reduce the risk of vibration-related 

injury:

1.  Anyone using vibrating tools regu-

larly or for an extended period should 

first be examined by a doctor and 

then have regular medical check-

ups to ensure medical problems are 

not being caused or worsened from 

use.  Pregnant women or people 

who have impaired blood circulation 

to the hand, past hand injuries, ner-

vous system disorders, diabetes, or 

Raynaud’s Disease should not use 

this tool.  If you feel any medical or 

physical symptoms related to vibra-

tion (such as tingling, numbness, and 

white or blue fingers), seek medical 

advice as soon as possible.

2.  Do not smoke during use.  Nico-

tine reduces the blood supply to the 

Summary of Contents for 97593

















Reviews: