
Page 12
SKU 96617
For technical questions, please call 1-800-444-3353.
Electrical Specifications
Alternator Type: 2-Pole, Single Phase
Output Frequency: 60 Hz
Output: ,00 Continuous Watts / 6,300 Peak Watts
AC Receptacles: Four 120V, 20A 3 Prong Grounded Receptacles
One 240V, 30A, 4 Blade Twist Lock Outlet
DC Receptacle: Two Post Threaded 12VDC Outlet
Main Circuit Breaker: Trigger and setting point: 12/20 VAC, 2A,
(Rated: 120/240VAC, 23A)
Circuit Breaker for DC: Trigger and setting point: 0 VDC 10A
(Rated: 12 VDC, 8.3A)
Overload Protection: Yes
Engine Specifications
13 HP / 4-Cycle / Electronic Ignition & Recoil Start
389 cc Displacement
Engine Speed: 3,600 RPM
Spark Plugs: F7RTC (NHSP LD) with gap of 0.028”-0.031”
Required Fuel Type: Unleaded Gasoline
Fuel Capacity: 7 Gallon
Recommended Oil Type: F-SAE 30W (Above 32°)
F-SAE W-30W (Below 32°)
Engine Oil Capacity: 1.16 Quarts
Automatic Low Oil Shut-Down: Yes
EPA and CARB Approved
Overall Dimensions
28-3/8” L x 20-1/8” W x 21-7/8” H
Run Time
9 hour continuous run time at 0% load
Weight
196 Pounds
The Emission Control System for this engine is warranted for standards set by the U.S.
Environmental Protection Agency and by the California Air Resources Board (also known
as CARB). For warranty information, refer to the last pages of this manual.
unpacking
When unpacking, check to make sure that the item is intact and undamaged. If
any parts are missing or broken, please call Harbor Freight Tools at the number shown
on the cover of this manual as soon as possible.
set up instructions
read the entire iMportant saFetY inForMation section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
risk of accidental starting; resulting in serious personal
injury. turn the power switch of the generator to the “oFF”
position before assembling or making any adjustments to the
generator.
note:
For additional information regarding the parts listed in the following pages, refer
to the Assembly Diagrams near the end of this manual.
warning
warning