SKU 94627 For technical questions, please call 1-800-444-3353 PAGE 10
4.
Pressing Indicator Light (82): The GREEN Pressing Indicator Light illuminates
when the Pressing Board (1) has reached the selected temperature.
(See Figure E.)
5.
Steam Burst Button (36): The Steam Burst Buttons on each side of the Handle
(35) produce a burst of steam when pressed. (See Figure E.)
6.
Steam Burst Ready Indicator Light (83): The YELLOW Steam Burst Ready
Indicator Light illuminates once the Steam Press is ready to produce bursts of
steam. (See Figure E.)
7.
Handle (35): The Handle raises and lowers the Pressing Board (1).
(See Figure E.)
8.
Locking Knob (63): The Locking Knob locks the Pressing Board (1) and Ironing
Board (58) together for carrying and storing the Steam Press. (See Figure E.)
9.
Pressing Board (1): The Pressing Board is the temperature controlled surface
that heats and presses the fabric. (See Figure E.)
10.
Ironing Board (58): The Ironing Board is the padded surface that holds the
fabric during pressing. It has a removable Cover (84) that is washable.
(See Figure E.)
11.
Water Tank (20): The Water Tank is where tap water or distilled water is stored
for use by the Steam Press. There must be water in the Water Tank in order for
the unit‘s steam burst function to work properly. (See Figure E.)
OPERATING INSTRUCTIONS
1.
NOTE: The Steam Press is equipped with an Automatic Shut-Off mechanism
which turns off electric power to the internal Heater when the Pressing Board (1)
is left against the Ironing Board (58) for more than 10 seconds, or if the Pressing
Board is left in the raised position without use after 15 minutes. The heating
ability of the Steam Press is restored when the Pressing Board is lowered or
raised from its position.
IMPORTANT: The Automatic Shut-Off does not mean power is totally cut off.
Power is always on, and the Power Indicator Light (59) remains on as well until
the Power Switch (66) is turned to its “OFF” position. To turn the power on again,
turn the Power Switch to its “OFF” position. Then, turn the Power Switch to its
“ON” position. (See Figure E.)
The Automatic Shut-Off: