SKU 94488
For technical questions, please call 1-800-444-3353
PAGE 6
Only composite abrasive or diamond abrasive Saw Blades rated at a mini-
mum of 4,700 RPM.
Never use carbide-tipped, woodcutting, or circular machine Saw Blades. They
can cause severe personal injury from reactive forces, blade contact, or thrown
objects.
Only cut asphalt, concrete, stone, brick, and plastics with this Cut Off Saw.
Inspect the Saw Blade frequently, and replace immediately if the Blade is
cracked, or warped. Cracked or warped Saw Blades may shatter or break and
cause serious personal injury.
Always install the Saw Blade so that the arrow on the Blade points in the di-
rection of the rotation of the spindle.
Keep hands and fingers away from the cutting area and Saw Blade.
Never attempt to cut more than one workpiece at a time.
When cutting a large workpiece, make sure its entire length is properly sup-
ported. If necessary, use a roller stand (not included).
Allow the Saw Blade to spin up to full speed before feeding it into a workpiece.
When turning off the Cut Off Saw, allow the Saw Blade to spin down and stop on
its own. Do not press against the Saw Blade to stop it.
Do not force the Saw Blade into the workpiece when cutting. Apply moderate
pressure, allowing the Saw Blade to cut without being forced.
To avoid accidental injury, always wear heavy duty work gloves when chang-
ing the Saw Blade.
The Saw Blade will become hot while cutting. Allow the Saw Blade to completely
cool before handling.
Turn off the Cut Off Saw and allow the Saw Blade to completely stop if the
Saw Blade is to be backed out of an uncompleted cut.
Never attempt to remove material stuck in the Cut Off Saw while it is operat-
ing.
KICKBACK PRECAUTIONS
Make sure the workpiece is free from nails, metal rebar, and any other foreign
objects that could damage the Saw Blade or cause “kickback”.
Causes and operator prevention of “kickback”: Kickback is a sudden reaction
to a pinched, bound, or misaligned Saw Blade, causing an uncontrolled Cut Off
Saw to lift up and out from the workpiece toward the operator. When the Saw Blade
d.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
1.
2.
