Chicago Electric 93375 Assembly And Operating Instructions Manual Download Page 12

Page 12

SKU 93375

       For technical questions, please call 1-800-444-3353

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM
IN THIS MANUAL AS A REFERENCE TOOL ONLY.  NEITHER THE MANUFACTURER
NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND
TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE
PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE
PRODUCT.  IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN
BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE
ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF
HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Filter Cleaning

5.

Regularly clean the filter cartridge with a soft bristle brush. To clean more thoroughly,

dip the filter cartridge in water and use a shower fitting or a spray nozzle on a garden
hose to direct water inside the cartridge to the outside.  Make sure the filter is
completely dry before reinstalling it on the Motor Housing (1).

6.

If the filter cartridge becomes encrusted or damaged, discard it and replace it with a

new cartridge.  It is recommended to keep spare filter cartridges handy.

Exhaust Air Port Filter

Periodically remove and clean the Exhaust Air Port (19) filter by gently prying open the
grille.  After filter cleaning, reinstall the grille making sure the arrow on the inside of the grille
is pointing upwards.

Container Tank

Check Tank (9) level often, especially when vacuuming a large volume of material.  The
drum should be emptied when about half full.

If dirty liquids have been picked up, empty the container and wash it together with the ac-
cessories.

TROUBLESHOOTING

If the Wet/Dry Vacuum blows dust when operating, check the condition and capacity of the
Cartridge Filter (6) and the Foam Filter (5). Clean filters if necessary.

If  suction at the hose appears to be reduced, check for a clogged hose, clogged filter, or a
full tank.

Summary of Contents for 93375














Reviews: