SKU 92115
Page 12
For technical questions, please call 1-800-444-3353.
Warning: Be sure the power switch is in the OFF positiojn, and the tool is unplugged
from its power source before attempting inspection or repair.
1.
Tool does not turn on: Possible causes include no power at outlet, damaged
power cord on tool, broken power switch on tool, burnt out electrical brushes on tool.
Check outlet by testing a different electrical appliance known to work. Check
condition of power cord. If tool still does not operate, take it to a qualified service
technician for repair. NOTE: Motor repair work including replacing electrical
brushes should be done by a qualified repair technician only. The electrical
brushes on this item are not owner servicable.
2.
Tool operates slowly: Possible causes include incorrect voltage at power outlet,
damaged or dirty cutting blades, damaged or worn electrical brushes. Confirm that
outlet delivers the correct voltage. Examine the cutting blades for obstruction, dirt or
wear. If these suggestions do not repair the problem, take the tool to a qualified
service technician for repair.
3.
Tool does not cut satisfactorily: Possible causes include dirty, damaged or dull
blades. If simple cleaning does not repair the problem, take the tool to a qualified
service technician for repair.
TROUBLESHOOTING
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST
AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEI-
THER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTA-
TION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALI-
FIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALI-
FIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTUER
AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS
REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED
TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND
LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT
OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTAL-
LATION OF REPLACEMENT PARTS THERETO.
PLEASE READ THE FOLLOWING CAREFULLY
