Page 2
SKU 91129
For technical questions, please call 1-800-444-3353.
Specifications
Item Description
Testing Capability
12 VDC batteries, alternators, starters
Load Test Capacity
160 amp hour; Up to 1000 cold cranking
amps maximum testing; 0 ~ 500A load
Display Meters
Analog, 0~16 VDC (maximum)
Analog, 0~500A; 0~160AH; 0~1000 CCA
Test Cycle
15 seconds per test with 1 minute cool
down; 3 tests in 5 minutes
Battery Cable / Clamps 3 (L) feet, copper plated clamps, # 4 AWG
Overall Dimensions
10-1/2 (W) x 9 (H) x 5 (D) inches
Weight 8.7
lbs.
Features
Carrying handle and four rubber feet
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
General Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to re-
duce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.
Keep work area clean. Cluttered areas invite injuries.
2.
Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lit. Do not use electrically
powered tools in the presence of flammable gases or liquids.
3.
Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords.
4.
Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5.
Use the right tool for the job. Do not attempt to force a small tool or attachment to do
the work of a larger industrial tool. There are certain applications for which this tool
was designed. It will do the job better and more safely at the rate for which it was
intended. Do not modify this tool and do not use this tool for a purpose for which it was
not intended.
6.
Dress properly. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically non-conductive clothes and non-skid footwear
are recommended when working. Wear restrictive hair covering to contain long hair.
