background image

SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS

1.

DO NOT SUBMERGE THE MOTOR HOUSING (3) IN WATER OR OTHER

LIQUIDS.

2.

Guard against Electric Shock. Always prevent body contact with grounded

surfaces such as pipes, radiators, ranges, refrigerators, etcetera. Do not handle
any part of the Vacuum/Blower with wet hands when the unit is plugged in to its
electrical supply source. To comply with the National Electric Code (NFPA70),
and to provide additional protection from the risk of electrical shock, this
Vacuum/Blower should only be connected to a  receptacle that is protected by a
Ground Fault Circuit Interrupter (GFCI).

3.

Reduce the Risk of fire and/or explosion. Sparks inside the Motor assembly

can ignite flammable vapors, liquids, and dust. Do not use the Vacuum/Blower
in the presence of any flammable, combustible, or explosive substances.

4.

Avoid hazardous vapors and dusts. Never use the Vacuum/Blower in the

presence of toxic materials.

5.

Do not use the Vacuum/Blower as a sprayer.  Do not use to groom

animals.

6.

Do not vacuum any material that is burning or smoking, such as hot ashes,

lit cigarettes, etcetera. Avoid vacuuming ashes all together.

7.

Warning: People with pacemakers should consult with their physician(s) before

using this product. Operation of equipment in close proximity to a heart
pacemaker could cause interference or failure of the pacemaker.

8.

Warning: This product contains or produces a chemical known to the State of

California to cause cancer and birth defects (or other reproductive harm).

(California Health & Safety Code 25249.5 et seq.)

Unpacking

When unpacking, check to make sure the following parts (shown on page 7) are
included. If any parts are missing or broken, please call Harbor Freight Tools at the
number on the cover of this manual.

Operation

Note: For additional references to the parts listed below, refer to the Parts List and
Assembly Diagram on pages 7 and 8 of the manual.

SKU 90981

    Page 4

Summary of Contents for 90981









Reviews: