Page 6
For technical questions, please call 1-800-444-3353.
Item 69293
Set Up Instructions
Read the ENTIRE IMPORTANT SAFETY INSTRUCTIONS section at the beginning of this manual
including all text under subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Power Switch of the appliance to its “OFF” position and unplug the appliance
from its electrical outlet before assembling or making any adjustments.
Note:
For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
Assembly
1.
Figure A
Axle
Lower Frame
Bushing
Wheel
Lock Nut
Washer
Slide the Axle through the holes on the Lower Frame.
2. Slide a Bearing, a Bushing, a Wheel and
a Washer onto one end of the Axle.
3. Tighten in place with a Lock Nut.
4. Repeat steps 2 and 3 on the other end of the Axle.
5.
Figure B
Wheel
Cover
Press the Wheel Covers onto the Wheels, over the
Lock Nuts, using a rubber mallet (sold separately) to
lightly tap them in place if needed.
6.
Figure C
Slots
Base
Lower Frame
Turn the Chipper/Shredder upside down and slide the
Lower Frame ends into the slots on the Base.
7.
Figure D
Screws and Washers
Align the holes and secure in place with four Washers
and Screws.
SAFETY
OPERA
TION
MAINTENANCE
SETUP
Summary of Contents for 69293
Page 1: ......
