Page 5
For technical questions, please call 1-800-444-3353.
SKU 67631
pacemaker interference or pacemaker
failure.
WARNING: Some dust created by power
12.
sanding, sawing, grinding, drilling, and
other construction activities, contains
chemicals known [to the State of
California] to cause cancer, birth defects
or other reproductive harm. Some
examples of these chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and
cement or other masonry products
• Arsenic and chromium from chemically
treated lumber
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to
these chemicals: work in a well ventilated
area, and work with approved safety
equipment, such as those dust masks
that are specially designed to filter out
microscopic particles. (California Health
& Safety Code § 25249.5,
et seq.
)
WARNING: Handling the cord on this
13.
product will expose you to lead, a
chemical known to the State of California
to cause cancer, and birth defects or
other reproductive harm. Wash hands
after handling. (California Health &
Safety Code § 25249.5,
et seq.
)
The warnings, precautions, and
14.
instructions discussed in this instruction
manual cannot cover all possible
conditions and situations that may occur.
It must be understood by the operator
that common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
SaVe theSe
inStRuctionS.
Specifications
Motor
120 V~ / 60 Hz
Capacity
3 lb.
Barrel Type
Rubber (allows for
quieter operation)
unpacking
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon as
possible.
hoW tumbleR WoRkS
Read the entiRe impoRtant
SaFety inFoRmation
section at the beginning of this
manual including all text under
subheadings therein before set up
or use of this product.
to pReVent
SeRiouS injuRy
FRom accidental
opeRation: turn the power
Switch of the tool to its “oFF”
position and unplug the tool from
its electrical outlet before
assembling or making any
adjustments to the tool.
note:
For additional information regarding the
parts listed in the following pages, refer
to the Assembly Diagram near the end of
this manual.
The motion in the Barrel of a Tumbler simulates
the natural action of flowing water or ocean
waves. Beaches and riverbeds contain rocks
and pebbles smoothed by water and the abra-
sive sand it carries. As rocks grind upon one
another with constant water and sand in the
mix, they begin to round and smooth. Although
